et-loader
| Fourteencore Electronics |

Lichee pi Zero (hereafter referred to as Zero) is a delicate mini Cortex-A7 core board/development board, which can be used for beginners to learn Linux or for product development. Zero offers a wealth of peripherals (LCD, ETH, UART, SPI, I2C, PWM, SDIO…) and powerful performance (~24M~1.2G, 64MB DDR**) on a slightly longer SD card size (~ 45x26mm).

Zero uses a compact PCB design that makes development and use very convenient:

Inline breadboard
Inline 40P RGB LCD
Use OTG port for power supply and data transmission (virtual serial port, virtual Ethernet, etc.)
Networking with stacked WiFi modules Direct patch

Zero provides Mainline Linux support. You can use any programming you are familiar with on Linux.

Hardware parameter:

CPU: Allwinner V3S, ARM Cortex-A7, fastest 1.2GHz
RAM: integrated 64MB DDR2

Memory:
-ReservedSOP8 SPI FlashPad(customizable patch 8~32MB SPI Nor Flash,128MB Nand Flash)
-On-board half-slot TF card holder, can be started by TF

Display:
– General 40P RGB LCD FPC holder
1. Inline 40P 4.3/5/7 Inch screen(on-board backlight driver), 50P 7/9 inchscreen can be inserted through the adapter plate
2. Resolution support 272×480, 480×800,1024×600 etc.
3. On-board resistive touch screen chip,support resistive screen
– On-board RGB LED

Communication Interface:
– SDIO x2,Can be used with the matching SDIO WiFi+BT module
– SPI x1
– I2C x2
– UART x3
– 100M Ether x1(include EPHY)
– OTG USB x1
– MIPI CSI x1

Other interface:
– PWM x2
– LRADC x1
– Speakerx2 + Mic x1

Electrical characteristics:
Micro USB 5V power supply
2.54mm Pin 3.3V~5Vpower supply
1.27mm stamp hole power supply
Output 3.3V 和 3.0V(AVCC)
Optional input RTC voltage
1GHz linux no-load operating current 90~100mA
full-load operating current ~180mA
Storage temperature -40~125℃
Operating temperature -20~70℃

Note:
Using F1C100s as the main chip of lichee pi Nano, Arm9 architecture, 16KB D-Cache, 32KB I-Cache, support boot from SPI Flash or TF card, support USB OTG loading update.
USE A GOOD STABLE POWER SUPPLY & A MEMORY CARD BEYOND 8 GB CLASS 10.
Start up requires the card to start (or solder SPI flash), only plug in the USB without issues

Package included:

1x Lichee pi Nano board
1x Adapter

Reviews

There are no reviews yet.

Be the first to review “Lichee Pi Zero 1.2GHz Cortex-A7 64MB DDR2”

Your email address will not be published. Required fields are marked

Related Products

et-loader

Out of stock

10 in stock

-12%

Orange Pi R1 H2 Quad...

$25.88 $22.87