| Fourteencore Electronics |


Sonoff TH10is a wireless temperature and humidity monitoring switch which can remotely monitor and set temperature and humidity range to turn on/off connected appliances through the iOS/Android APP eWeLink. Just as the name indicates, the Sonoff TH temperature and humidity monitor device supports two maximum current supply specifications: 10A.
Sonoff TH10 remote temperature monitor and wireless humidity monitor WiFi switch supports presetting the range for temperature or humidity. When the temperature or humidity of your home environment falls within the range, it will automatically turn on or off the connected devices.
Sonoff TH10 supports three kinds of temperature monitor and humidity monitor sensors, mentioned below:
Si7021, AM2301, DS18B20.
Si7021(wiki) Highly Recommended!
Note: the sensors are not included in the package of Sonoff TH10.
The sensor should be plugged into the smart switch before power-on. It is not advised to plug or unplug the sensor after power-on. DS18B20 is waterproof, which can only measure temperature. Other sensors can measure both temperature and humdity.
With the eWeLink app, users can create simple conditional statement (Smart Scene) to trigger on/off other smart devices.  This means users can use Sonoff TH10 with Si7021, AM2301, DS18B20 sensor to detect temperature/humidity, and then set specified temp. or hum. ranges as conditions to trigger on/off other smart devices in the same account, such as Sonoff Basic, Sonoff RF, Sonoff SV, S20. This device works perfectly with electric fan, air conditioner, humidifier, smart fish tank, watering system, etc.


Supports tracking device status
Supports remote turn on/off connected appliance
Supports presetting temperature and humidity to turn on/off
Supports 8 enabled countdown/single/repeat  timing tasks
Support checking real-time temperature and humidity
Support setting smart scene to trigger on/off other smart devices
Works with Amazon Echo, Echo Dot, Amazon Tap
Works with Google Home, Google Home Mini, Google Nest
Works with IFTTT


Input voltage: 90~ 250V AC
Input current: Max 10A
Max. Power: 2200W(10A)
Humidity: 5%-90%RH, Non-condensing
Operating Temperature: 0ºC-40ºC(32°F-104°F)
Wireless Standard: 802.11 b/g/n
Security Mechanism: WPA-PSK/WPA2-PSK
Enclosure Material: Fire-retardant ABS V0
Dimension: 114*51*32 (mm)
Supported temperature, humidity sensors: Si7021, AM2301, DS18B20
Gang: 1
Certification: CE, RoHS, FCC
UPC (for Sonoff TH10): 6920075700947

Package included:

1 x SONOFF TH10 WIFI Wireless Temperature Humidity Thermostat Module



There are no reviews yet.

Be the first to review “SONOFF TH10 10A 2200W WiFi Smart Home Switch Controller with Temp/Humid Thermostat”

Your email address will not be published. Required fields are marked

Related Products